Lightweight end-of-arm tooling that survives 10⁶+ duty cycles without warp or backlash. 3DBuildBot delivers selective laser sintering parts in Carbon Fiber Nylon (PA12-CF) with full material traceability and instant online quoting.
High stiffness-to-weight ratio with near-zero warp at altitude or under cyclic load. Production-grade nylon parts with no support structures and full design freedom.
Designed for high-cycle automation lines and collaborative robotics cells.
Quote on this capability ↓ (process & material pre-loaded)
Demo mode · drop any .stl / .step / .obj — we'll simulate analysis
Specifications
Typical values for robotics parts produced in our certified facilities.
Process
Selective Laser Sintering
Material
Carbon Fiber Nylon (PA12-CF)
Values represent typical XY-plane properties for as-built parts. Z-axis and post-processed specs available on request — every shipment includes a material certificate.
Production workflow
From CAD upload to crated delivery. Every step is timestamped on the digital traveler that arrives with your parts.
DFM review
Applications engineer validates thin walls, draft angles, and SLS-specific constraints within 4 business hours.
Build prep
Nesting, support generation, and tool-path optimization on calibrated Selective Laser Sintering machines.
Production
Lights-out runs on certified reinforced thermoplastic stock. Operator initials logged at every shift change.
QC & ship
CMM verification on critical dimensions, then DDP shipping with full traceability.
Post-processing
Every SLS part ships with standard post-processing included. Upgrade at quote time for parts that need to look (or behave) like production.
Bead-blast standard
Matte uniform finish; included.
Vapor smoothing
Sealed surface; ~50% strength gain in Z.
Dye (black / RAL)
Through-color, no flaking.
EOS-grade media tumble
Soft edge break for handling parts.
Typical applications
Real parts our robotics customers have shipped using this exact configuration in the last 90 days.
End-effectors
SLS · Carbon Fiber Nylon
Gripper jaws
SLS · Carbon Fiber Nylon
Cable management
SLS · Carbon Fiber Nylon
Sensor mounts
SLS · Carbon Fiber Nylon
Lead time
2–4 business days
Includes DFM review, production, QC, and DDP shipping. Express tier available (next-day) at quote time.
Customer story
A representative robotics engagement using SLS in Carbon Fiber Nylon (PA12-CF).
1,240
Parts
3 days
Lead time
0.4%
Reject rate
"We were quoting SLS Carbon Fiber Nylon parts across three vendors with two-week lead times. 3DBuildBot collapsed that to a single dashboard with same-day DFM feedback. It's how we ship hardware on a weekly cadence now."
Engineering Lead
Robotics & Automation program
FAQ
Related capabilities